Description
PRODUCT DESCRIPTION
Resuprime ESD is a two-pack epoxy primer containing conductive fillers used to create a conductive layer underneath Sherwin-Williams staticdissipative flooring systems to allow consistent earthing of electrical charge.
ADVANTAGES
- Excellent adhesion
- Conductive with very low electrical resistance
- High solids
- Low odour
- Ease of application
RECOMMENDED USE
As a conductive primer for all Sherwin-Williams static-dissipative flooring systems
MIXING AND APPLICATION
Materials should be pre-conditioned at 15C to 25C prior to use. Mix
the entire contents of the base component with the hardener component
using a low speed electric mixer (300 to 400 rpm) for 1 to 2 minutes
until homogeneous. The mixed unit should be applied immediately after
mixing by roller or brush.
Resuprime ESD should be applied over the top of a copper tape grid to
aid the electrical earthing. Please refer to specific System Sheet for more
information.
Note: Application by squeegee is not recommended for this product as
there is the potential to damage the copper tape grid.
Reviews
There are no reviews yet.