Description
Single pack water-based elastomeric coating with superior adhesion and corrosion protection. Excellent anti-corrosion properties, chromate and zinc free which can be applied by spray, brush and roller.
- Available in 20kg units
—
You’ll know the original product – meet the improved addition to the Noxyde coatings family – single pack water-based elastomeric coating based on a silane modified acrylic binder with superior adhesion and corrosion protection. The product contains anti-corrosion pigments and is lead, chromate and zinc free which can be applied by spray, brush and roller.
Advantages:
- Superior adhesion
- High dirt pick up resistance
- 200% elastic coat does not crack or peel
- Excellent coverage of nuts, bolts and welds
- Dry fall: saves preparation & clean up time
Recommended Uses:
On iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc. as rust prevention or waterproofing. For outside and inside use.
Diluted with 25% water as an adhesion primer coat on slightly or non porous substrates such as glass, smooth bricks and concrete, ceramics, tiles, etc.
Technical Data
Density (g/cm): 1,25
Gloss Level: Satin
Gloss level at 60: 24%
Solids Content in weight: 66%
Solids content in volume: 46%
Salt Spray Resistance: 1.248h salt spray resistance ISO 9227:2017
Drying Times
Touch dry: 1hr and 20 minutes
Dry to handle: 2 hours and 45 minutes
Dry to recoat: 24 hours
Fully cured: 2 weeks
Recommended Wet Film Thickness
380 m
Recommended Dry Film Thickness
175 m
Theoretical Consumption
Brush/Roller 240 360 g/m/coat
Airless 360 600 g/m/coat
Total consumption for optimal rust preventive protection 950 g/m (in minimum 2 coats) = 350 m dry film thickness
Reviews
There are no reviews yet.