Description
Fast drying Primer/Finish high performance anti-corrosion coating with universal adherence.
Unique coating for its performance, formulated based on innovative resins for the protection of equipment and structures against corrosion and erosion with exceptional durability.RD-Monoguard is a DTM (Direct-To-Metal) type coating that can be applied directly to various ferrous and non-ferrous metals. It has obtained a C5 High certification according to the ISO 12944-6 standard.
USE:
Fast drying Primer/Finish high performance anti-corrosion coating with universal adherence.
FEATURES:
Single component water-based coating based on a special blend of innovative resins for the protection of metal surfaces, objects and engineered structures against corrosion and weathering. RD-Monoguard is a DTM (Direct-To-Metal) type of coating that can be applied directly to various ferrous and non-ferrous metals. Its special formulation and ingredients offer incredible durability when it comes to protecting steel against corrosion, even without priorly blasting the surface.
RD-Monoguard is water-based, easy to handle, safe and has no fire risks.It is a fast-drying coating system that greatly reduces downtime during installation and increases on-site labour productivity.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Monoguard is UV resistant and its film forms a neat and tidy enamel type of finish.
Tested to be used in the most severe environments, RD-Monoguard protects valuable assets worldwide 24/7 including bridges, tanks, etc.
RD-Monoguard is part of the SCS Single Coating System product group.
SUBSTRATES:
Steel, new and old galvanised steel, stainless steel, aluminium, copper,
APPLICATION CONDITIONS:
Ambient temperature: minimum 5 C (41F) Optimal between 12 and 25C (54 and 77F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3C (5F) above dew point.
APPLICATION MEANS:
Brush, roller or airless (nozzle size: 010012)
Application by airless is recommended and makes it easier to reach the recommended thicknesses. Use a device that allows a minimum pressure of 70-150 bar / 1000 2000 psi at the outlet.
PREPARATION OF THE SUBSTRATE:
The substrate must be clean: dry, degreased and dust free. Non adhering elements such as older coatings or rust must be removed. Different type of surface preparation are possible:
1/ Remove rust manually or by power tool to ST2 ISO 8501-1/SSPC SP2 or SP3.
2/ Blasting to SA 2 ISO 8501-1/NACE3/SSPC SP6.
3/ High pressure washing following SSPC SP12 WJ4.
Aluminum:clean with sulfuric acid diluted to 10%.
On new galvanized steel:preferably clean with RD-Eco PowerClean detergent diluted with water or use a conventional detergent.
Stainless steel:preferably clean with RD-Eco PowerClean detergent diluted with water or use a conventional detergent.
Copper:clean with hydrochloric acid diluted to 10% and rinse with water.
DILUTION:
Product is ready-for-use. Dilute with maximum 3% water when applying by airless or in warm weather conditions (> 25C / > 77F).
DRYING TIME (20C 68F):
Touch dry: +/- 1 hour depending on thickness
Recoatable: +/- 2 hours depending on film thickness
Possible to apply wet on wet in special conditions.
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Reviews
There are no reviews yet.