PPG SigmaFast 20 RAL Tier 1

Description

A fast-drying, anticorrosive high-build zinc phosphate primer, based on modified alkyd resin

• Colour: Grey, Red Brown, Off White, Wide range of RAL colours available on request

• Finish: Flat

—

Product Description

PPG SigmaFast 20 is a fast-drying, anticorrosive high-build zinc phosphate primer, based on modified alkyd resin.

• Pack size:5 litre and 20 litre units

• Colours: Wide range of RAL colours available

• Gloss level: Flat

Features and Benefits

• Good anticorrosive properties under atmospheric conditions

• Fast-drying

• Fast-handling

• Recoatable with most one- and two-component coatings

• Suitable for atmospheric exposure conditions

• Lead- and chromate-free

• Can be specified as a single coat, direct-to-metal system for ISO 12944 C1 and C2 environments

Method of Application

• Air spray

• Airless spray

• Brush/Roller

Overcoating

Two-component products:

• PPG SigmaCover 456

• PPG SigmaCover 435

• PPG SigmaDur520

Alkyd-based products:

• PPG SigmaFast 20

• PPG SigmaFast 40

Please contact usfor other suitable topcoats.

Thinner

Air Spray: PPG Thinner21-06
Volume of Thinner: 5 – 10% depending on required thickness and application conditions.

Airless Spray: PPG Thinner21-06
Volume of Thinner: 0 – 5% depending on required thickness and application conditions.

Brush/Roller:PPG Thinner20-05
Volume of Thinner: 0 – 2 %

Refer to product Data Sheet for further details.

Cleanup

PPG Thinner 21-06

Safety Precautions

Adequate ventilation must be maintained during application and curing (please refer to Information Sheets 1433 and1434).

For paint and recommended thinners see Information Sheets 1430, 1431 and relevant Material Safety Data Sheets.

This is a solvent-borne paint and care should be taken to avoid inhalation ofspraymist or vapour, as well as contactbetween the wet paint and exposed skin oreyes.

Please refer to the product Data Sheet and Material Safety Data Sheets for full details regarding the safe use of this product.

Technical Data

Basic Data at 20C (68F) for mixed product:

• Number of components: One

• Mass density: 1.5 kg/l (12.5 lb/US gal)

• Volume solids: 55 2%

• VOC (Supplied): Directive 1999/13/EC, SED: max. 258.0 g/kg. UK PG 6/23(92) Appendix 3: max. 382.0 g/l (approx. 3.2 lb/US gal)

• Recommended dry film thickness: 50 – 75 m (2.0 – 3.0 mils) per coat

• Theoretical spreading rate: 7.3 m2/l for 75 m (294 ft2/US gal for 3.0 mils)

• Dry to touch: 15 minutes

• Overcoating Interval: Minimum: 45 minutes

• Shelf life: At least 24 months when stored cool and dry

Please refer to the Product Data Sheet for additional technical data.

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.