Jotun Jotamastic 90 B16 White

Description

A two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired.

• Pack Size: 20 litres

• Colour: White

—

Jotun Jotamastic 90 B16

Jotun Jotamastic 90 B16 is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired.

• Pack Size: 20 litres

• Colour: White

Product Description

Jotamastic 90 B16 provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.

Typical Use

• General: Primarily designed for maintenance and repair.

• Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Approvals and Certificates

• HA Item No116.

Additional certificates and approvals may be available on request.

Application

The product can be applied by:

• Airless Spray

• Brush: Recommended for stripe coating and small areas, care must be taken to achieve the specified dry film thickness

• Roller: May be used for small areas. Not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness

Product Mixing Ratio (by volume)

• Component A: 3.5 parts

• Component B: 1 part

Thinner / Cleaning Solvent

Jotun Thinner No. 17

Product Compatibility

Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product. Some examples are shown below. Contact us for specific system recommendation.

• Previous coat: epoxy shop primer, inorganic zinc silicate shop primer, zinc epoxy, epoxy, epoxy mastic, inorganic zinc silicate

• Subsequent coat: polyurethane, polysiloxane, epoxy, acrylic, vinyl epoxy

Storage

The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

Shelf life at 23C: 48 months for Component A; 24 months for Component B.

Caution

• This product is for professional use only

• The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun’s technical documentation.

• Applicators and operators shall use appropriate personal protection equipment when using this product

• This guideline is given based on the current knowledge of the product

• Any suggested deviation to suit the site conditions should be forwarded to us for approval before commencing the work

Safety

• Please observe the precautionary notices displayed on the container

• Use under well ventilated conditions

• Do not inhale spray mist

• Avoid skin and eye contact

• Spillage on the skin should immediately be removed with suitable cleanser, soap and water

• Eyes should be well flushed with water and medical attention sought immediately

Refer to the Product Data Sheet and Safety Data Sheet for further details, or contact us for advice.

Contact Us

For further advice regarding the use of this product, technical support or a quotation pleasecontact us.