Intertherm 3070 Golden Yellow

Description

Description

Designed specifically for the subsea market, Intertherm 3070 is a two component phenolic epoxynovolac with excellent high temperature resistance and compatibility with cathodic protection.

Where To Use

Specifically intended to provide corrosion protection for subsea equipment such as trees andmanifolds.Intertherm 3070 has been designed for use to protect subsea equipment with a maximum steeloperating temperature of 185C (365F).

Characteristics

Intertherm 3070 will not cure adequately below 10C (50F). At no time during the application and up tothe first 48 hours after application of the final coat must the steel temperature fall below 10C (50F). Inaddition, the relative humidity must not exceed 50% for temperatures in the range 10-20C (50-68F), orexceed 80% for temperatures greater than 20C (68F).

Intertherm 3070 should be at 15C (59F) prior to application.In common with all epoxy coatings Intertherm 3070 may chalk or discolour on exterior exposure. Rate ofchalking will depend upon climatic conditions, will have no adverse effect upon anti-corrosive propertyand will be limited to a thin surface layer.

The recommended total system DFT is 350 microns (14 mils), applied as two coats of 175 microns (7mils). Intertherm 3070 may also be applied as three coats of 120 microns (4.8 mils). The overall coatingsscheme thickness must not exceed 450 microns (18 mils)