Intergard 251HS Buff

Description

Description

A two component, low VOC, high solids, fast curing epoxy primer containing zinc phosphate anti-corrosivepigmentation.

Suitable for overcoating within 2 hours under common climatic conditions. Early handling properties make this an ideal primer for speeding up production and throughput.

Where To Use

For use on a range of industrial facilities and infrastructure assets where film build and fast through-put arepriorities.This primer, in combination with approved topcoats, offers optimized anticorrosive protection in variousatmospheric environments.

Technical Information

Intergard 251HS is preferred for use with systems for chemical environments where zinc basedmaterials can be subject to attack in both acidic and alkaline conditions.
Apply in good climatic conditions. The temperature of the surface to be coated must be at least5F (3C) above the dew point. Over-application of Intergard 251HS will extend both the minimum overcoating periods and handling times. When applying Intergard 251HS by brush or roller, it may be necessary to apply multiple coats to achieve the required film build. In common with all epoxies, Intergard 251HS will chalk and discolor on exterior exposure. Where a durable cosmetic finish with good gloss and color retention is required, overcoat with recommended topcoats. Intergard 251HS is not designed for continuous water immersion. An alternative curing agent to improve application properties in tropical climates is also available.