Description
Description
Stoving paint for the protection and decoration of steel components, fabrications and other suitablyprepared substrates.
Where to use
Principally intended for prepared mild steel substrates, ferrous and suitable prepared non-ferrousmetal substrates, but excluding zinc/galvanized iron.
Technical Information
Colours: Full tintable colour range. All RAL & BS4800
Colours and specials on request
Pack Size: 5 litre, 20 litre
Gloss Level: Gloss.
Resin Type: Alkyd
Components: Single Component
Generic Type: Solvent-based
Theoretical Spreading Rate: (approx) 13m per litre based on 50m wft
Volume Solids: (approx) 42-43%
Dry Film Thickness: (DFT) 2022m
Wet Film Thickness: (WFT) 50m
Flash Point:23-32C
VOC Content: 600gms/litre
Temperature Resistance: 200C
Application
Ensure surfaces are clean, dry and free from grease and other contamination before coating.Thoroughly degrease and where applicable, abrade to remove rust and promote good adhesion of thecoating. For optimum corrosion protection, mild steel should be blast cleaned to Sa2.5 or powertooled to achieve ST3. Complex structures may be more effectively cleaned by HPWJ (high pressurewater jetting).
Substrate temperature during application and curing should be above 5C (41F).
Substrate temperature during application and curing should be at least 3C (5F) above dew point.
| Brush | No | |
| Roller | No | |
| Conventional spray | Yes | |
| Airless spray | No | |
| Air assisted airless spray | No |
Recommended Thinner : Guard Solvent A
Reviews
There are no reviews yet.