Description
The GRACO SP1B.0023 SaniForce 2.0 HS Series Pneumatic Diaphragm Pump is a sanitary air-operated double diaphragm pump designed for hygienic transfer applications. It features a stainless steel fluid section and is intended for use in food, beverage, personal care, and pharmaceutical industries where high sanitation standards are required.
Key Features:
- Air-operated double diaphragm pump (AODD)
- SaniForce 2.0 HS Series, 1″ sanitary tri-clamp flange (center)
- Sanitary stainless steel (316L) fluid section, stainless steel standard air valve, Santoprene diaphragms, EPDM manifold O-rings, polychloroprene weighted balls
- Up to 150 gpm (567 lpm) (Note: SP1B.0002 is up to 150 gpm; SP1B.0023 is not directly specified, but likely similar as it is the same series and size)
- Up to 125 psi (8.6 bar) (Note: SP1B.0002 is up to 125 psi; SP1B.0023 is not directly specified, but likely similar)
- Compatible with a wide range of fluids in food, beverage, personal care, and pharmaceutical applications
- High sanitation (32 Ra), FDA-compliant, meets CFR Title 21, options for 3A, ATEX, USP Class VI, CE, 3.1 certification (specific certifications may vary by configuration)
- Single piece manifolds reduce tri-clamps and gaskets for easier cleaning and maintenance
- 360-degree rotation for quick draining and easy servicing
- Tri-clamp connections for accelerated cleaning and minimal downtime
- Designed for rigorous, continuous use with quick knockdown design for easy cleanability and sanitation
- Lube-free, non-sticking air valve with external serviceability for quick, inexpensive repairs
- All fluid contact materials are FDA-compliant
Applications:
Ideal for hygienic transfer in food, beverage, personal care, and pharmaceutical industries. Suitable for handling solids up to 3.8″ (96.5 mm) in diameter and for use with high-temperature fluids or steam cleaning.
Installation Notes:
- Using genuine GRACO parts ensures optimal performance, reliability, and compliance with industry standards and regulations.
- Ensure proper alignment of tri-clamp connections for leak-free operation
- Install pump in a location that allows for easy access for maintenance and cleaning
- Follow manufacturer guidelines for air supply and pressure settings
- Regularly inspect diaphragms, O-rings, and other wear parts for signs of wear or damage
- Rotate pump 360 degrees for complete draining and sanitizing
- Perform routine cleaning and sanitizing as per industry standards
- Replace diaphragms and O-rings at recommended intervals
- Check for leaks and ensure all connections are secure
- Use only compatible cleaning chemicals and fluids
Reviews
There are no reviews yet.