Description
The GRACO MVP-150 Vapor Recovery Pump is an electric-powered, dual-diaphragm pump designed for hydrocarbon extraction processing, specifically for LP-Gas (liquefied petroleum gas) vapor recovery. It features stainless steel wetted parts and is intended for use in hazardous locations where reliable, safe vapor recovery is required.
Key Features:
- Electric-powered, dual-diaphragm vapor recovery pump
- MVP-150
- Stainless steel wetted parts, PTFE or optional FKM fluoroelastomer diaphragms
- LP-Gas vapor recovery rate: 6 cfm (0.17 m/min); Butane recovery rate: 1.5 lb/min (0.68 kg/min); Propane recovery rate: 2 lb/min (0.9 kg/min)
- Maximum pumping outlet pressure: 150 psi (1.03 MPa, 10.3 bar); Maximum pumping inlet vacuum: 27 inHg gauge (9.3 kPa absolute); Equipment withstand pressure: 375 psi (2.59 MPa, 25.9 bar)
- Designed for LP-Gas (butane, propane) vapor recovery in hydrocarbon extraction processing
- ATEX certified (for hazardous locations, model MVP-150-ATEX)
- Hazardous location motor
- Dual-diaphragm design for reliability
- Stainless steel process pressure section and reed valves
- Optional FKM fluoroelastomer diaphragms for wider temperature range
- Low CO consumption (<0.2 scfh)
- Sound pressure: 80.5 dBA at 1 m
Applications:
Used for recovering and re-condensing LP-Gas vapors (butane, propane) in hydrocarbon extraction and processing environments, especially in hazardous locations.
Installation Notes:
- Using genuine GRACO parts ensures optimal performance, safety, and compliance with hazardous location requirements.
- Ensure all electrical installations comply with NEC and local codes
- Properly ground the equipment
- Follow manufacturer guidelines for hazardous location installation
- Regularly inspect diaphragms and wetted parts for wear or damage
- Use only recommended replacement parts
- Monitor CO consumption and pump performance
- Check for leaks and abnormal noise
- Refer to the manual for scheduled maintenance intervals
Reviews
There are no reviews yet.