Curing Lamp & Stand to cure Gclear coating fully and quickly

Description

Glasweld curing lamp & stand works with any headlights. For long-lasting headlight restoration results, use this Headlight Curing Lamp & stand to cure Gclear coating fully and quickly. The adjustable floor stand allows for changing the height and angle to work with any headlight.

Select Voltage

120 volt 240 volt

The sun is great for sunbathing not curing Gclear. For headlight restoration results that last for years (and years), use this Headlight Curing Lamp to cure Gclear fully and quickly.
OnceGclearhas been applied, place the curing light directly in front of the headlight. Adjust the angle and position of the light as needed. It usually takes approximately 5-10 minutes to cure a headlight.
Click here to see the Headlight Curing Lamp in action.

Note: Photos shown are for illustration purposes only. Actual product may vary due to product enhancements and adjustments.
How to restore headlights ?
step one:
Remove the coating
Using the orbital sander,sanding disks and water bottle,remove all of the current headlight coating.
step two:
Coat the haedlights
Apply Gclear coating evenly on the entire headlight.
step three:
Cure the coating
Glasweld curing lamp & stand. Use the UV curing lamp to fully cure the coating.
Gclear demo:
see it in action
see the headlight restoration process from begginning to end.
Curing lamp & stand consists of pressurized, sealed envelope containing gasses and/or metals with two electrodes, one at either end. A pulse of high voltage arcs the gap between the electrodes, (in early arc lamps the light emitting plasma was noted as bowing upwards in a curve or an arc, hence the name arc lamp). Heat from the arc vaporizes gases and/or metals in the envelope forming a plasma. This plasma generates light and UV energy.