Pneumercator MP450S-124-21 316 SS Magnetostrictive Rigid Probe for 10′ Diameter Tank, Product Gauging, Bottom Water Detection, One Temperature Sensor – (SKU: MP450S-124-21)

Description

Pneumercator MP450S-124-21 316 SS Magnetostrictive Rigid Probe for 10′ Diameter Tank, Product Gauging, Bottom Water Detection, One Temperature Sensor – (SKU: MP450S-124-21) is a rigid magnetostrictive level probe designed for accurate product level measurement, bottom water detection, and single-point temperature monitoring in 10-foot diameter petroleum storage tanks. It is intended for use where combined level, interface, and temperature data are required from a single tank penetration.

Magnetostrictive Product Gauging: The MP450S-124-21 uses magnetostrictive technology with a guided product float to provide highresolution continuous level measurement along the probe shaft. Connected to a compatible tank monitoring console, it supplies precise product height information for inventory management, ullage calculations, and level alarm functions.

Bottom Water Detection: In addition to product gauging, the probe includes a bottom water sensing capability positioned near the tank floor to detect the presence of accumulated water at the productwater interface. This allows the monitoring system to distinguish between fuel and water, supporting waterintank alarms and maintenance planning to preserve fuel quality and protect downstream equipment.

Single Temperature Sensor: The MP450S-124-21 incorporates one built-in temperature sensing element in the probe assembly to measure product temperature at the tank. This temperature signal can be used for temperaturecompensated inventory, basic product quality checks, and alarm or control functions that depend on process temperature.

316 Stainless Steel Rigid Construction: The probe features a 316 stainless steel shaft with compatible float and wetted materials, providing corrosion resistance and mechanical robustness in demanding fuel storage environments. Its rigid design ensures stable float guidance and reliable sensing over the full active measuring range for 10′ diameter tanks.

Typical Applications: MP450S-124-21 is suited to gasoline, diesel, fuel oil, and compatible chemical tanks that require continuous level measurement, bottom water detection, and a single temperature measurement point. Integrated with a tank management system, it supports inventory tracking, overfill and low-level protection, waterintank alarms, and temperature monitoring from one compact probe.

Key Specifications: Series MP450S; Model MP450S-124-21; Function 316 stainless steel rigid magnetostrictive probe for product gauging, water detection, and one temperature sensor; Technology Magnetostrictive continuous level measurement with product float, water detection capability, and integrated temperature sensor; Materials 316 stainless steel shaft with compatible float and seal materials; Mounting Tankmount riser on 10′ diameter tanks; Outputs Continuous product level signal, water detection indication, and one temperature signal to compatible monitoring equipment.

Summary: The Pneumercator MP450S-124-21 combines magnetostrictive product gauging, bottom water detection, and singlepoint temperature sensing in a 316 stainless steel rigid probe, providing a comprehensive measurement solution for 10′ diameter fuel storage tanks through a single tank entry.