Pneumercator MP460S-064-21 316 SS Magnetostrictive Rigid Probe for 4′ Tank Depth Class, Product Gauging with Bottom Water Detection and Integrated Temperature Sensing (SKU: MP460S-064-21)

Description

Pneumercator MP460S-064-21 316 SS Magnetostrictive Rigid Probe for 4′ Tank Depth Class, Product Gauging with Bottom Water Detection and Integrated Temperature Sensing (SKU: MP460S-064-21) is a stainless steel magnetostrictive level probe designed for shorter tanks where accurate product level measurement, bottom water detection, and a single temperature reading are required from one probe assembly.

Magnetostrictive Product Gauging: The MP460S-064-21 uses magnetostrictive sensing with a guided float to provide highresolution continuous product level measurement along the active length of the probe, supplying precise product height data for inventory management, ullage calculation, and configurable level alarms when connected to a compatible monitoring console.

Bottom Water Detection: A dedicated watersensing float or interface element near the lower end of the probe enables detection of accumulated water at the bottom of the tank, supporting waterintank alarms and maintenance planning to protect stored product quality and downstream equipment.

Integrated Temperature Sensing: A builtin temperature sensing element within the probe assembly provides a representative product temperature signal from the tank, allowing temperaturecompensated inventory calculations, basic product quality verification, and temperaturedependent alarm or control logic.

316 Stainless Steel Rigid Construction: The probe features a rigid 316 stainless steel shaft with compatible wetted materials for corrosion resistance and mechanical durability in typical fuel and light chemical storage environments, helping ensure stable, repeatable measurement performance over time.

Sized for Shorter Tanks: With an effective length suited to tanks in the approximate 4′ depth class, the MP460S-064-21 is appropriate for smaller day tanks, generator tanks, or similar applications where fullheight measurement and interface detection are needed in a compact form factor.

Typical Applications: This probe is suited for gasoline, diesel, fuel oil, and similar product tanks requiring continuous level gauging, bottom water detection, and a single temperature point from one tank penetration, particularly in compact storage systems.

Key Specifications: Series MP460S; Model MP460S-064-21; Function 316 stainless steel magnetostrictive rigid probe for short tanks with product gauging, bottom water detection, and one temperature sensor; Technology Magnetostrictive continuous level measurement with product and water floats plus integrated temperature element; Materials 316 stainless steel shaft with compatible float and seal materials; Mounting Tanktop or risermount installation on appropriately sized tanks; Outputs Continuous product level signal, bottom water indication, and one temperature signal to compatible monitoring equipment.

Summary: The Pneumercator MP460S-064-21 combines stainless steel magnetostrictive product gauging, bottom water detection, and temperature sensing in a compact rigid probe sized for shorter tanks, providing a complete measurement solution through a single access point.