NATCEM DW

Description

NATCEM DW is a fast setting and curing, rapid strength gain mortar intended for use in drinking water applications, primarily for repairs to concrete and waterproof rendering typically to stone and brick work.

NATCEM DW

Reg.31 Approved Fast-Setting Mortar

NATCEM DW is a fast setting and curing, rapid strength gain mortar intended for use in drinking water applications, primarily for repairs to concrete and waterproof rendering typically to stone and brick work.

• Approved to Reg. 31 for use in drinking water applications

Product Description

NATCEM DW is a fast setting and curing, rapid strength gain mortar consisting of a blend of natural cement-based binder, naturally occurring minerals, retarders and specially selected and graded aggregates all passing a 2 mm sieve. It is also Reg.31 approved for contact with drinking water with only hour curing period after set required.

Recommended Uses

• Chemical Resistance

• Reg.31 Approved Products for contact with drinking water

• Concrete Repairs

• Tanking

• Rendering

• Floor Screed

Sectors

• Utilities

• Construction

• Civil Engineering

• Railways

• Mining

• Water

Product Advantages

• Approved to Reg. 31 for use in public water supplies

• For use in drinking water applications

• Fast Curing hour only after set

• Fast Setting

• Rapid strength gain

Natural Cement Product Range

NATCEM 35	NATCEM AC	NATCEM D	NATCEM DW
NATCEM Tank	NATSEAL	Grout 105	CWG Grout
LUL RapideSet	ShotCrete AS90	ShotCrete 430F	ShotCrete 437F
ShotCrete 513	ShotCrete 530	TrackCrete	WaterStop

Related Product Videos

The following videos feature NATCEM 35 – please refer to the product data sheet for full instructions regarding the use of NATCEM DW.

Surface Preparation

Please refer to the product data sheet or contact us for advice.

Mixing

Please refer to the product data sheet or contact us for advice.

Application

Please refer to the product data sheet or contact us for advice.

Cleanup

NATCEM DW should be removed from tools and equipment with water immediately after use.

Storage

Unopened bags of NATCEM DW should be stored in dry conditions and will remain usable for a minimum of 12 months.

Precautions

• Wear suitable protective clothing when handling bags and mixing the material.

• Wear safety glasses, work gloves and dust mask.

• Avoid spillage from damaged bags

• Avoid breathing the powder

• Avoid raising dust especially when sweeping

• Always add the powder to the water to avoid raising dust

• Avoid skin contact with the wet mortar, concrete or grout during the setting reaction

• Discard immediately any clothing which becomes saturated with wet cement

A full material safety data sheet relating to this product is available – please contact us to request a copy.

Contact Us

For further advice regarding the use of this product, technical support or a quotation pleasecontact us.