PPG SigmaCover 456 RAL Tier 2

Description

Description

SigmaCover 456 is a two-component, high-build, polyamide-cured recoatable epoxy coating.

Main Characteristics:

• General-purpose epoxy buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions

• Easy application, both by airless spray and brush

• Cures even at temperatures down to -10C (14F)

• A high relative humidity (maximum 95%) during application and curing does not influence the quality of the coating

• Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings

• Can be recoated with various two-component and conventional coatings, even after long weathering periods

• Resistant to water and splash of mild chemicals

• Excellent corrosion resistance

• Tough, with long-term flexibility

Marine Use:

A two component, high build polyamide-cured epoxy coating.

This is a general purpose epoxy build-coat or a finish coat in a protective coating system for steel (and concrete) structures exposed to atmospheric land and marine conditions.

This coating can be applied by airless spray or brush, curing in the harshest of environment as low as -10C (14F) With excellent corrosion resistance this tough coating offers long term flexibility providing you with an attractive semi-gloss finish.

Additional product: 91-92 Thinner

Colours and Gloss Levels:

• Standard and custom colors

• Semi-gloss

• Note: Epoxy coatings will characteristically chalk and fade upon exposure to sunlight.