Description
RAL 9007 metallic effect finish lacquer for interior and exterior application.
Useful for the renovation of claddings, garage doors, equipment, furniture etc., RD-AquaFinish is applied as a finish on our anti-corrosion products, or directly on the surface in some cases.
USE:
High performance interior and exterior metallic effect enamel with superior properties.
FEATURES:
RD-Aquafinish 97is a single-component topcoat based on acrylic and polyurethane resins that offers a hard flexible and wear resistant white aluminium film effect that can be used for decorative and protective purposes.
RD-Aquafinish 97is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Aquafinish 97creates a nice and smooth finish. Thanks to its high-quality aluminium pigments, it offers very good resistance to humidity and has a very good outdoor durability.
SUBSTRATES:
Various surfaces like plastics, concrete, cement, wood, metal, when primed accordingly.
APPLICATION CONDITIONS:
Ambient temperature: minimum 5C (41F) Optimal between 12 and 25C (54 and 77F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3C (5F) above dew point.
APPLICATION MEANS:
Brush, roller or low pressure pneumatic spray gun.
PREPARATION OF THE SUBSTRATE:
Preparation will depend on the kind of substrate. In general, the surface must first be coated with a primer, clean and degreased prior to applying RD-Aquafinish 96.
DILUTION:
Product is ready-for-use.
DRYING TIME (20C 68F):
Touch dry: +/- 1h30 hours
Dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
PREPARATION:
Mix well before use.
Reviews
There are no reviews yet.