FasTop SL ESD Buff

Description

PRODUCT DESCRIPTION

FasTop SL ESD is a static-dissipative polyurethane/cement based flow-applied flooring system applied at nominal 3 mm thickness.

ADVANTAGES

• Static dissipative seamless finish
• High chemical resistance
• Resistant to hot water
• Self smoothing
• Hard wearing
• Matt finish

RECOMMENDED USE

A wide range of industrial applications such as:

Pharmaceutical and chemical plants

Electrical industrial areas

Food manufacturing areas

Chemical plants

Oil and gas facilities

Industrial workshops

MIXING AND APPLICATION

Prior to mixing, the temperature of the four components must be between 15 and 25C. Pre-mix the coloured base component before use. Add the FasTop SL ESD base to the mixing vessel then add the hardener component and mix using a low speed electric mixer (300 to 400 rpm) for approximately 30 seconds until homogeneous. Add the powder aggregate whilst mixing followed by the conductive aggregate, mixing for approximately 3 minutes until homogeneous scraping the sides of the mixing vessel until a uniform, lump-free mix is obtained.