Macropoxy 646 RAL Tier 1

Description

Technical Information

Designed to protect steel and concrete in industrial exposures, Macropoxy 646 epoxy is ideal for maintenance painting and fabrication shop applications. The high-solids content ensures adequate protection of sharp edges, corners and welds. This product can be applied directly to marginally prepared steel surfaces. It is a versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting. User friendly with a 1:1 mix ratio, it is fast drying, surface tolerant and available in a range of colours making it ideal for atmospheric and immersion service.

Low VOC

Chemical resistant

Low odour

Abrasion resistant

Outstanding application properties

Where To Use

Marine applications

Pulp and paper mills

Refineries

Power plants

Chemical plants

Offshore platforms

Tank exteriors

Nuclear Power Plants

Water treatment plants

White is acceptable for immersion use for salt water and fresh water, not acceptable for potable water

Advantages

• Suitable for use in USDA inspected facilities

• Acceptable for use in Canadian Food Processing facilities, categories D1, D2, D3 (confirm acceptance of specific part numbers/recommendations with your Sherwin-Williams sales representative)

• Conforms to AWWA D102 OCS

• Conforms to MPI # 108

• This product meets specific design requirements for non-safety related nuclear plant applications in Level II, III and Balance of Plant, and DOE nuclear facilities. Nuclear qualifications are NRC license specific to the facility.

• Meets Class A requirements for slip coefficient, 0.36 @ 6 mils / 150 microns dft (Mill White only)