Description
Description
This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. It is a fast drying, highsolids, high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level2 and ISO 12944-5. It provides very good corrosion protection as part of a complete coating system. To be usedas primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating anddamaged galvanised steel substrates. This product complies with ASTM D520 type II zinc dust.
Where to use
Protective:
Suitable for structural steel and piping exposed in corrosivity categories up to CX (ISO 12944-2). Recommendedfor offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structuralsteel. Specially designed as a primer for coating systems where extended durability is required.
Key features
- For severe corrosive environments
- Fast dry-to-recoat
- Fast dry-to-handle
- High solids
- 80% zinc dust content
Approvals
Tested in accordance with ISO 12944-6, high expected durability in corrosivity category C5H and C5VH.
Pre-qualified in accordance with NORSOK M-501 in selected systems
Colours
Grey
Application
| Spray | Use airless spray |
| Brush | Recommended for stripe coating and small areas. Care must be taken to achieve thespecified dry film thickness. |
Reviews
There are no reviews yet.