Repacor SW-1000 Yellow

Description

Repair coating / putty with 100 % volume solids.

Repacor SW-1000 is an abrasion resistant, innovative 2-pack coating / putty for maintenance or repair of (mechanically) damaged coating areas. Mechanically- and UV-resistant protective coating in easy-to-use-cartridge.

• Solvent-free, 100 % solids, CMR-free

• Easy-to-use packaging for difficult repair jobs

• Single layer coating

• Early water resistance and under water cure

• Surface tolerant – can be used on many substrates as manually prepared steel, stainless steel, galvanization or aluminium, even on foreign coatings (except siloxane based coatings)

• Corrosion protection at 500 m, similar to original in shop coating

• Diffusion resistant

• Plate like glass flakes increase coating strength

• Impact and abrasion resistant

• Very high colour retention

• If required overcotable with 2-pack PU topcoats

Recommended Use

Can be used as a corrosion protection putty for On and Offshore (wind turbines), for hydraulic engineering (lock gates, steel sheet piles etc.) or other elevated steel structures if a simple, high performance and durable repair coating is required.

Pack Size

A two component material supplied in a cartridge: Cartridge with 380 g,
12 cartridges per box, 75 boxes on palett. Volume will vary with colours and density.