Description
The GRACO MVP-150 Vapor Pump Head Replacement is a critical component designed for use in GRACO vapor recovery systems, specifically as a replacement for the 1050E series. It is constructed with a process pressure section and reed valves made of stainless steel, and features PTFE (standard) or optional FKM fluoroelastomer diaphragms. Its primary function is to recover and re-condense LP-Gas vapors, ensuring safe and efficient operation within GRACO equipment.
Key Features:
- Vapor Recovery Pump Head
- MVP-150
- Stainless steel process pressure section and reed valves; PTFE (standard) or FKM fluoroelastomer (optional) diaphragms
- LP-Gas vapor recovery rate: 6 cfm (0.17 m/min); Butane recovery rate: 1.5 lb/min (0.68 kg/min); Propane recovery rate: 2 lb/min (0.9 kg/min)
- Maximum pumping outlet pressure: 150 psi (1.03 MPa, 10.3 bar); Maximum pumping inlet vacuum: 27 inHg (9.3 kPa, 93 mbar); Equipment withstand pressure: 375 psi (2.59 MPa, 25.9 bar)
- Designed as a replacement for GRACO 1050E series vapor recovery systems
- Driven by CO gas charge for reliable operation
- Designed for ease of maintenance and replacement
- Robust construction for long service life
- Operates within a wide temperature range (PTFE: +4 to 104C; FKM: -40 to 135C)
Applications:
Used in LP-Gas vapor recovery and re-condensation systems, suitable for industrial, agricultural, and commercial applications where safe handling of flammable vapors is required.
Installation Notes:
- Using genuine GRACO parts ensures optimal performance, safety, and compatibility with existing equipment.
- Ensure CO supply is properly connected and set to 150 psi for correct operation
- Check for worn or damaged valves and replace as necessary
- Follow manufacturer guidelines for installation and maintenance to prevent air ingress and ensure system integrity
- Regularly inspect diaphragms and valves for wear
- Maintain proper CO pressure and check for leaks
- Use only recommended materials and replacement parts
Reviews
There are no reviews yet.