Description
The GRACO 205 Air Motor for Metering (SKU:. 240899) is an air-operated component designed for use in GRACO metering systems. It is typically constructed from durable materials such as acetal, polypropylene, or PVDF, and is engineered to provide reliable air-driven operation for fluid transfer and metering applications within GRACO equipment.
Key Features:
- Air motor for metering
- Husky 205
- Acetal, polypropylene, or PVDF (depending on variant)
- Maximum fluid working pressure: 100 psi (7 bar, 0.7 MPa); Air pressure operating range: 20 to 100 psi (1.4 to 7 bar, 0.14 to 0.7 MPa)
- Compatible with GRACO Husky 205 series pumps and metering systems
- Reliable air-driven operation
- Low noise (typical sound level at 70 psi: 70 dBA)
- Maximum air consumption: 9.0 scfm (0.252 m/min)
- Durable diaphragm construction
- Suitable for a wide range of industrial applications
Applications:
Used in fluid transfer and metering systems for industrial lubrication, maintenance, and process applications. Suitable for use in environments requiring reliable, air-powered fluid handling.
Installation Notes:
- Using genuine GRACO parts ensures optimal performance, reliability, and safety of the metering system.
- Ensure proper air supply within the specified pressure range (20 to 100 psi)
- Use recommended air line filters and mufflers for optimal performance and noise reduction
- Install a bleed-type master air valve as required for the pump
- Connect ground wire for safety
- Follow manufacturers instructions for fluid inlet/outlet connections and maintenance
- Regularly inspect air lines and connections for leaks
- Maintain clean air supply to prevent contamination
- Check diaphragm and seals for wear and replace as needed
- Refer to the equipment manual for detailed installation and maintenance procedures
Reviews
There are no reviews yet.