Description
The GRACO 223595 is a reciprocating displacement pump constructed from carbon steel with chrome plating, designed for severe-duty applications. It is intended for use as a replacement or service part within GRACOs Monark and President series pumps, handling a variety of fluids including high-solids coatings, resins, and cleaning fluids.
Key Features:
- Displacement pump, reciprocating
- Carbon steel with chrome plating, severe-duty
- Up to 2760 psi (190 bar, 19 MPa) maximum fluid working pressure (for associated 23:1 ratio Monark pump model 223596)
- Compatible with GRACO Monark and President series pumps, specifically designed for use with model 223596 (23:1 ratio)
- Severe-duty construction for abrasion resistance
- Stainless steel glands and intake housing (on associated pump models)
- Reliable, long-lasting performance
- Ease of maintenance with available repair kits
Applications:
Used in industrial and commercial fluid handling systems for transferring solventborne and waterborne fluids, high-solids coatings, resins, stains, lacquers, varnishes, cleaning fluids, and acid-catalyzed materials.
Installation Notes:
- Using genuine GRACO parts ensures optimal performance, safety, and longevity of the equipment.
- Follow the pressure relief procedure before servicing to prevent accidental startup.
- Ensure proper alignment and secure mounting of the displacement pump on the tie rods.
- Torque the packing nut/wet-cup to 1820 ft-lb (2427 Nm).
- Fill the wet-cup with GRACO Throat Seal Liquid or compatible solvent.
- Tighten tie rod locknuts evenly and torque to 1015 ft-lb (1420 Nm).
- Reconnect all hoses and ground wire after installation.
- Start the pump at about 40 psi (2.8 bar) air pressure to check operation.
- Regularly inspect and lubricate moving parts.
- Use only recommended repair kits (e.g., Repair Kit 235636 for model 223595).
- Store hazardous fluids in approved containers and dispose according to regulations.
- Wear protective eyewear, gloves, clothing, and respirator as recommended.






Reviews
There are no reviews yet.